Friability and desintegration

Features of the Dual Drum Friability : Meets USP, EUR, DAB pharmacopoeia Economical
Dual Drum Meets USP, EUR, DAB pharmacopoeia Microprocessor control with keypad. Programmable counter timer Ergonomically designed instrument. Supports two front-loading drums. Automatic sample discharging into a tray located below the drum. Filling of samples into the drum without removing the drums. A 10 deg. Tilt of the drum with the base of the instrument as per USP. Supports abrasion drum with lamellas. This item is always on stock.

The NEW RS232 MHT-1000 Manual Tablet Hardness Tester, is the ideal tool for'in-situ'measurement of tablet hardness. This enables the user to react quickly to adjust the compression force of a tablet press and reduce the costs created by tablets produced out of specified hardness limits. Due to its light weight construction (approx.1.5 kg.) and the independent power supply (battery charged) can easily be carried from tablet press to tablet press. To measure, the safety cover is opened, the sample placed in the measuring station and is pressed against a metal plate (connected to an electronic load-cell) moved by a handwheel, until the sample brakes. The result of the measurement is shown on the built-in LCD in either N, kN, kg or lb. Using the supplied brush, the tablet debris and dust can be transported into the collection box located under the test station. When the collection box is full, it can be easily removed and emptied. Calibration of the unit is quite simple. Every time the unit is switched on it fulfils an automatic alf-calibration (zero calibration). Technical Features Peak hold Hold the peak value in test ; Peak hold and clean automatically Hold the peak value, keep the value in 1-10 seconds (time is selected) ; Auto power off The gauge will power off in 1-60 minutes (time is selected), there is not operation ; Comparative function Setting the upper limit and lower limit, the pilot lamp and buzzer to choose the eligible value ; Calculate the average value Memory 10 data and calculate the average of memory data ; UOM : Three units lbf, kgf, and Newton units are push-button selectable ; RS-232 series port digital outputThe RS-232 series port output to printer. The printing data have maxvalue, min value, average value, eligible value and incompetent value. Capacity : 500N Min load : 0.1N Sensor conformation : Sensor Inside Value error : ±0.5 %.

SCOPE OF DELIVERY-dosing control system (sample beaker with butterfly valve ; pipe, material : aluminium ; detachable thereforeeasy to snap in and out of instrument boby)-optical unit (LED light source and detector)-sample collector-power cable-communication cable for PC-embedded display TECHNICAL DATA weight approx.12 kg dimensions (H x W x D) 340 x 310 x 220 mm with sample dosing system : 900 mm total heigth power supply 220 V/115 V or on battery operation light source LED (long life, min.100.000 hours) working conditions temperature range 0 °C to + 40 °C humidity, non condensing amount of sample 1 - 200 g (depending on material ; typically 30 g) measurement time 30 seconds typically measurement principle light extintion.

SCOPE OF DELIVERY-dosing control system (sample beaker with butterfly valve ; pipe, material : aluminium ; detachable thereforeeasy to snap in and out of instrument boby)-optical unit (LED light source and detector)-sample collector-power cable-communication cable for PC-embedded display TECHNICAL DATA weight approx.12 kg dimensions (H x W x D) 340 x 310 x 220 mm with sample dosing system : 900 mm total heigth power supply 220 V/115 V or on battery operation light source LED (long life, min.100.000 hours) working conditions temperature range 0 °C to + 40 °C humidity, non condensing amount of sample 1 - 200 g (depending on material ; typically 30 g) measurement time 30 seconds typically measurement principle light extintion.

Rent a Dual Drum Friability for 2weeks. This item is always on stock (yet, we recommend that you make a reservation). This items corresponds to the rental for the the first 2 weeks. If you wish to keep it longer, simply add additional weeks or months. Any additional week is 199 Euros ; additional month : 349 Euros. If you want to buy the unit, rentals full value is deducted from the instrument's price.

The manual Tablet Hardness Tester is the ideal tool for in-situ measurement of tablet hardness. This enables the user to react quickly to adjust the compression force of a tablet press and reduce the costs created by tablets produced out of specified hardness limits. Due to its light weight construction (approx.1 kg.) and the independent power supply (battery charged) it can easily be carried from tablet press to tablet press. To measure, the safety cover is opened, the sample placed in the measuring station and is pressed against a metal plate (connected to an electronic load-cell) moved by a handwheel, until the sample brakes. The result of the measurement is shown on the built-in LCD in either N, kN, kg or lb. Using the supplied brush, the tablet debris and dust can be transported into the collection box located under the test station. When the collection box is full, it can be easily removed and emptied. Calibration of the unit is quite simple. Every time the unit is switched on it fulfils an automatic self-calibration (zero calibration).
Specifications : Test samples up to 28 mm diameter/lengths ; Electronic load cell with strain gauge ; Measuring Range 1 - 500 Newton (kN, kg or lb) accuracy of the load cell ± 1N. Stainless steel test-jaw ; Touch keys and LCD for display of results ; Carrying handle ; Storage case ; Debris brush ; Acrylic glass safety cover ; Integrated removable collection box for tablet debris and dust ; automated semi-calibration (zero-point adjustment) ; Power supply by 4 AA batteries ; Light weight (approx.1.170 g).
Options (not included) : Extended test station for samples up to 50 mm diameter/length.1000N Portable Tablet Hardness Tester with printer connection software/printer capabilities (not available on 500N version). Calibration checking kit (stirrup/5 kg Namas certified weight).

Rent a Dust Monitor DUSTMON for 2weeks. This item is always on stock (yet, we recommend that you make a reservation). This items corresponds to the rental for the the first 2 weeks. If you wish to keep it longer, simply add additional weeks or months. Any additional week is 700 Euros ; additional month : 2100 Euros. If you want to buy the unit, rentals full value is deducted from the instrument's price.